AREA |
LAST COUNT DATE |
COUNT |
CHANGE FROM PRIOR COUNT |
DATE OF PRIOR COUNT |
CHANGE FROM LAST YEAR |
DATE OF LAST YEARS COUNT |
UNITED STATES |
5/17/13 |
1769 |
+0 | 5/10/13 |
-217 |
5/18/12 |
CANADA |
5/17/13 |
118 | +5 |
5/10/13 |
0 |
5/18/12 |
USA OFFSHORE |
5/17/13 |
52 |
+2 | 5/10/13 |
+5 |
5/18/12 |
INTERNATIONAL |
04/2013 |
1301 |
+33 |
3/2013 |
+123 |
4/2012 |
World Oilfield Forum
Hi, I have a Stop Card by one of rig crew who observed making drill pipe stand by air winches and power tong in mouse hole while drilling operation is ongoing (Top drive System), he believed that it is unsafe practices, however i could not find any references for this observation..
Any comment or experience on this?
Shahram
Views: 492
Permalink Reply by TJ on 
Permalink Reply by Michael Taylor on 
Permalink Reply by Jeff Stoner on We use to always make up and break down stands of pipe while drilling. So what... even without single latch elevators. We would just run the air hoist to the board with a weight on it, have the derrickman put a couple of wraps on a stand, mousehole it and break it down. We used the tongs and spinning chain as well. Just dont step on the damn rotary table while its turning...
Permalink Reply by Mina Aziz Salama on May be you find all safety precautions in the manual ( while making stands off-line)
© 2013 Created by Drilling Ahead.
