Drilling Ahead

World Oilfield Forum

Saif Alnasr Shwekat
  • Male
  • Algawalish
  • Libyan Arab Jamahiriya
Share Twitter

Saif Alnasr Shwekat's Friends

  • IX
  • khaled Mohamed shehab
  • jeremy   raney
  • Donald W Coen

Saif Alnasr Shwekat's Groups

Saif Alnasr Shwekat's Discussions

Cleaning Well Sand
1 Reply

Hi everybodyCan any one help me in what the best methods of removal the sand from the well in workover operations?Thank you in advanceContinue

Started this discussion. Last reply by IX Jan 12, 2013.

Handling Tools
2 Replies

Hi everybodyI wonder if anybody have some knowledge in how i can know that elevators, slips, swivels and other handling tools are still in good operating condition?Continue

Started this discussion. Last reply by Chris Keilberg Dec 19, 2012.

Brine weight increasing
1 Reply

Hi everybodyI wonder if anybody can help me in how to increase the brine weight to 8.5 ppg using KCL?Continue

Started this discussion. Last reply by IX Dec 9, 2012.

Fishing Job
6 Replies

Hi everybody I work at the rig site and I usually have a problem in retrieving tools from the hole, I wonder if anyone can help me in finding rules in carrying out a successful fishing job?  Continue

Started this discussion. Last reply by Joe Tullos Dec 25, 2012.

 

Saif Alnasr Shwekat's Page

Latest Activity

shahram vatanparast replied to Saif Alnasr Shwekat's discussion Derrick/Mast Integrity in the group Drilling HSE
"khaled Mohamed shehab        What is your Reference point?"
Nov 14, 2013
shahram vatanparast replied to Saif Alnasr Shwekat's discussion Derrick/Mast Integrity in the group Drilling HSE
"No, visual Inspection will not guarantee, your Mast integrity, check the related API requirements API 4G! as Mike mentioned in below . SHV"
Nov 14, 2013
ricardo alaniz replied to Saif Alnasr Shwekat's discussion Fishing job in the group Oilfield Consultants
"get a competent driller and crew!"
Aug 12, 2013
IX replied to Saif Alnasr Shwekat's discussion cleaning well sand
"Clean out with highly viscous brines (NaCl, CaCl,Bromides, etc. depending on BHP). Then plan on installing a properly sized screen across the open hole or the existing screen."
Jan 12, 2013
Saif Alnasr Shwekat posted a discussion

cleaning well sand

Hi everybodyCan any one help me in what the best methods of removal the sand from the well in workover operations?Thank you in advanceSee More
Jan 12, 2013
Joe Tullos replied to Saif Alnasr Shwekat's discussion Fishing Job
"Its important to have exact dimensions on what was ran in the hole. O.D.'s - I.D.'s - lengths - fishing necks etc. Its common to go on a rig and these dimensions are slightly off for a number of reasons. Fishing is also a lot of common…"
Dec 25, 2012
khaled Mohamed shehab replied to Saif Alnasr Shwekat's discussion Derrick/Mast Integrity in the group Drilling HSE
"For five - years inspection , please see the inspection procedure as follows, Lowering of Mast Dismantle mast into sections  , Mast bottom section (ODS&DS) , Mast middle section  (ODS&DS), Mast top  section (ODS&DS) …"
Dec 24, 2012
William 'Buddy' Weaver replied to Saif Alnasr Shwekat's discussion Handling Tools
"There are Companies that Xray equipment such as those you are talking about. can't recall any Company's names, though.  "
Dec 16, 2012
Saif Alnasr Shwekat posted a discussion

Handling Tools

Hi everybodyI wonder if anybody have some knowledge in how i can know that elevators, slips, swivels and other handling tools are still in good operating condition?See More
Dec 15, 2012
richard scott blackmore replied to Saif Alnasr Shwekat's discussion Fishing Job
"what are you fishin for?"
Dec 14, 2012
jeremy raney replied to Saif Alnasr Shwekat's discussion Fishing Job
"get the right tools for the job  "
Dec 13, 2012
Horizon3 replied to Saif Alnasr Shwekat's discussion Derrick/Mast Integrity in the group Drilling HSE
"Visual inspection is great, but bolts need to be torque checked and some of them pulled to check for corrosion, and fr missing safety pins.A few frame members should also be pulled to check for corrosion between the two member.And the main pins…"
Dec 13, 2012
Saif Alnasr Shwekat's discussion was featured

Derrick/Mast Integrity

Hi everybodycan the Derrick/Mast visual inspection guarantee that the Derrick/Mast is still in good operating condition or other tests will be required?See More
Dec 13, 2012
Saif Alnasr Shwekat added a discussion to the group Drilling HSE
Thumbnail

Derrick/Mast Integrity

Hi everybodycan the Derrick/Mast visual inspection guarantee that the Derrick/Mast is still in good operating condition or other tests will be required?See More
Dec 13, 2012
IX replied to Saif Alnasr Shwekat's discussion Brine weight increasing
"If KCl is 100% pour then:   0.986 bbls. of Water + 11.6 # KCl should provide a bbl. of 8.5 ppg KCl brine."
Dec 9, 2012
khaled Mohamed shehab replied to Saif Alnasr Shwekat's discussion Choke Line integrity in the group Drilling HSE
"The Coflexip flexible hose structure consist of the following eight layers. 1. The thermoplastic inner liner The thermoplastic inner liner makes the pipe leak-proof. This layer limits the upperservice temperature of the line and the chemical…"
Dec 8, 2012

Profile Information

Do you agree to read our Drilling Ahead guidelines before posting content? (Please see the GUIDELINES above)
Yes

Comment Wall

You need to be a member of Drilling Ahead to add comments!

Join Drilling Ahead

  • No comments yet!
 
 
 
Sign Up To Receive Special Offers
Sign Up Here
 

Oilfield Gifts

Oilfield Drill Pipe Tally Books

 

Oilfield Jewelry Drill Pipe Elevators

 

Oil and gas Gift Pump Jack Music Box

 

 

Oilfield Keychains

 

© 2014   Created by Drilling Ahead.

Badges  |  Report an Issue  |  Terms of Service